One set of Fender System One Bridge Post Blades for replacement
Fender sys one side Post blades. As you see in the picture these two blades install on the left and right side of your Fender System One Bridge. Costly because not readilily available not to mention Vintage and not made since 1987. Almost 30 years ago. These slide right into the thin slot on the sides of the bridge. If you are replacing them us a needle nose or a vise grip because some glue them in, like me. I use a drop and Papatom said just a drop of crazy glue in the groove and set the Blade. Make sure the straight blade with the angle is on the High E side and the knurled blade with the groove in it is on the Low E side. Make sure your grooves are clean, spray some WD-40, don't get it in your eyes and blind yourself or get some electronics cleaner and spray into the grooves. Use a thin card board card and wipe clean. Install new blades to see how they will sit before gluing them in. Remember just a small drop of crazy glue.. rock on.